Português
The Labrador board is the Caninos Loucos’ first Single Board Computer. Open and with the functionalities of a computer, it is able to run on an Android or Linux operating system, access the internet via network cable or Wi-Fi, play videos, run text editing programs, and much more.
The Labrador is a combination of 2 boards, the core board, a small size card and high processing capacity, and the base board, where we find the various communication interfaces.
This set has ESD protection, is compact, durable and suits the most diverse applications, from personal projects to commercial applications.
- 32 bit Quad-core ARM® Cortex™ – A9R4 CPU
- System on module design
- 2GB LPDDR3 SDRAM
- On-board 16GB eMMC NAND flash storage;
- 204 standard DDR3 SODIMM pins
- Recovery Button
- Linux operating system, Debian
*Labrador ® board specifications
CORE BOARD V2.0
| CPU | 32-bit quad-core ARM® Cortex™ 1,3GHz A9R4 CPU (ARM v7 instruction set) |
| GPU | Imagination PowerVR SGX544. * Supports: OpenGL-ES 1.1 and 2.0, OpenGL 1.2.1, OpenCL 1.1 * |
| Memory | 2 GB DDR3 SDRAM 16GB eMMC |
| Operating System | Debian 11 Linux Kernel 4.19 32-bits |
| PMU | ATC2306C – Power management and audio subsystem |
| Video | 1080p@60fps supports video encoding (including H264, H263, MPEG-4) |
| Expansion | 204 pins DDR3 SODIMM connector (male) |
| Button | ADFU |
| Dimensions | 67.6 x 42.2 mm |
| Weight | 13.6g |
BASE BOARD M V1.0
| Storage | MicroSD Card Slot SD/SDHC/SDXC |
| Ethernet | 10/100Mbps (RJ45) |
| Wireless | Wi-Fi 802.11 b/g/n 2.4GHz Bluetooth 4.0 1 x infrared receptor (38kHz)* |
| USB | 2 x USB2.0 HOST (type A) 1 x USB3.0 OTG (micro-B)* |
| Display | 1 x HDMI 1.4 (type A), up to 1920×1080@60Hz 1 x LVDS-DSI para LCDs, up to 1920×1080@60Hz 1 x CVBS PAL/NTSC (PJ342 3,5mm) |
| Audio | HDMI output * Analog stereo output (PJ342 3,5mm) * I2S input/output * Embedded microphone * |
| Camera | 1 x 8 bits parallel interface * |
| LED | 1 x on/off (red) 1 x programmable (green) 1 x programmable (blue) |
| Buttons | 1 x on/off 1 x reboot 1x programmable |
| Power | 5~12V@3W (internal diameter 2,1mm, external 5,5mm, positive center) |
| Expansion | 204-pins SODIMM connector (female) 40-pin header: 28 GPIOs (compatible with Raspberry Pi / supports UART, I2C, SPI, PWM and I2S) ADC input |
| Debug | UART |
| Dimensions | 88 x 81,3 mm |
| Weight | 52,6g |